|
|
|
 |
Made from 16MnCr5 (Eqvivalent to SAE 8620) and case hardened to 55-58 HRc |
|
Precision ground. Runout within 0.010mm |
| IN ISO TAPER | ||
|
|
|
Range |
| ISO - 30 : 16, 22,27 mm, 3/4", 1" | ||
| ISO - 40 : 16, 22, 27, 32, 40 mm, | ||
| 40 & 60 mm Flange Type, 3/4", 1", 1 ¼”, 1 ½” | ||
| ISO - 50 : 16, 22, 27, 32, 40 mm, | ||
| 40 & 60 mm Flange Type, 3/4", 1", 1 ¼”, 1 ½” | ||
| IN MAS-BT TAPER | ||
|
|
|
Range |
| BT - 30 : 16, 22,27 mm, 3/4", 1" | ||
| BT - 40 : 16, 22, 27, 32, 40 mm, | ||
| 40 & 60 mm Flange Type, 3/4", 1", 1 ¼”, 1 ½” | ||
| BT - 50 : 16, 22, 27, 32, 40 mm, | ||
| 40 & 60 mm Flange Type, 3/4", 1", 1 ¼”, 1 ½” | ||
|
For Shell End Milling Cutters, Face Milling Cutters, Shoulder Milling Cutters |
||
| IN MORSE TAPER | ||
|
|
|
Range |
| MT - 3 : 16, 22, 27 mm, 3/4", 1" | ||
| MT - 4 : 16, 22, 27, 32, 40 mm, | ||
| 40 & 60 mm Flange Type, 3/4", 1", 1 ¼”, 1 ½” | ||
| MT - 5 : 16, 22, 27, 32, 40 mm, | ||
| 40 & 60 mm Flange Type, 3/4", 1", 1 ¼”, 1 ½” | ||
|
|
Morse tapers available in both tapped and tanged end type |
|
|
|
Cotter slots provided in tanged end types against request |
|
|
|
Spare tangs for tapped end type taper available to convert tapped end tapers to tanged type. | |
| IN R-8 TAPER | ||
|
|
|
Range |
| R-8 : 16, 22, 27, 32, 40 mm | ||
|
SHORT MILLING ARBORS |
|
|
|
|
|
|
|
