|
MODEL |
AVAILABLE
IN TAPER SIZES |
|
EXTRA LIGHT DUTY |
MT-1,
2 & 3 |
|
(Double Bearing) |
(Plain
Point only) |
|
STANDARD |
MT-1,
2, 3, 4, 5 & 6 |
|
(Heavy Duty Triple Bearing) |
(Plain,
Carbide Tipped, Female, Extended, HSS Tipped Points) |
|
EXTRA HEAVY DUTY |
MT-3,
4, 5 & 6
|
|
(Four Bearings) |
(Plain,
Carbide Tipped and Extended Points) |
|
SUPER EXTRA HEAVY DUTY |
MT-4,
5, 6 & 7 |
|
(Four & Five Bearings) |
(Plain
& Carbide Tipped Points) |
|
JUMBO HEAVY DUTY |
MT-5
& 6 |
|
(Plain
Point only) |
|
|
Application
: For Conventional Slow Speed Lathes |
|
|
All
Centers are sealed for entry of coolant and swarf / chips by special
sealing arrangement. |
|
|
Each
center provided with an inspection report covering all critical
parameters like run out, correctness of Morse Taper angle etc. |
|
|
Precision
Ground. Maximum radial run out within 0.015mm. Closer run outs can
also be provided against request. |
|
|
TRUMAX
offers India's largest range of Live centers to suit specific needs. |
|
|
Body
made alloy steel case hardened and tempered to a hardness of 32 - 40 HRc
approx. |
|
|
Point
made from bearing steel and hardened to 60 HRc approx. for maximum wear
resistance. |
|
|
Live
Centers broadly confirm to IS 3793 - 1966 |
|
Ask
for Catalogue 1A for Technical Specifications & Details.
|
|
| HIGH
SPEED CENTERS (FOR CNC) |
|
 |
|
|
Capable of withstanding
very high rpm at high loads. |
|
|
Suitable
for CNC and other high speed turning centers. |
|
|
Bearing
used are of FAG GERMANY make. |
|
|
Bearing
lubricated for life using imported KLUBER make ISOFLEX NBU-15 Grease. |
|
|
Imported
German Seals used for protecting bearing from dirt and coolant. |
|
|
Copy
Turning centers are not recommeded and should be used only for medium
speed and very low load applications. |
|
|
For
higher speeds than sp | | | | |
